Bosch Injector Bolt and Washer
3,98 € + DHL or Economy shipping
This bolt and washer are suitable for a single Bosch injector of Mercedes engine models OM611, OM612, OM613, OM628, OM646, OM647, and OM648. They ensure a secure and reliable fit for optimal engine performance. Made from high-quality, durable materials for long-lasting use. We have only ever used stock ones in all our engines.
Please order the correct quantity based on the number of injectors you have.
- For Bosch injectors
- High-quality
- Durable material
30 päivää maksuaikaa. Valitse maksutapa kassalla.
World wide shipping!
- EU zone 2–5 working days
- Elsewhere in the world 2–8 working days
Description
Ordering and installation
This product is a standard part and fits completely in standard parts place, no modifications needed.
- Make sure your threads are clean, this is by far the most common problem with injector bolts on these engines.
- Below is a hack video on how to clean injectors threads, watch it! In short, use the old bolts as a cleaning tool, and clean out MANY TIMES, until the bolt does not catch any debris at all whe screwed back and forth.
- Tightening torque on these bolts is 7Nm +90deg +90deg
- Do not use same bolt twice!
@blacksmokeracing Tämän yksinkertaisen operaationkin voi tehdä monella tavalla väärin, tässä oikea! Trodolta kupongilla black50 – yli 50€ tilauksiin ilmainen toimitus! #varaosat #trodo #mekaanikko #mersu #suutin
Additional information
| Weight | 0,1 kg |
|---|---|
| Dimensions | 5 × 2 × 2 cm |
| Torque | 7Nm +90deg +90deg |
| Size | Standard |
Frequently Asked Questions
Use helicoil, there is room to drill it out and insert an M6 helicoil. We have had this method work many times.
The bottom might be damaged, it needs to be cleaned properly for this a small metal brush attached to drill. In worst case scenarios the bottom needs to be cleaned with a reamer, please avoid using this method and if there is no other option use it very carefully to remove as little as possible from the seal surface and have a professional do it for you.
You never need to use thicker seals/washers, the standard measurement is always good.
You may also like…
-
Mercedes diesel performance STREET injectors
From: 956,18 €- Design to work optimally with original pistons.
- Up to 85hp per cylinder
- Every set is individually tested and balanced
- Injector map provided if needed
- OM64X & OM61X
- In stock!
Select options This product has multiple variants. The options may be chosen on the product page -
Mercedes diesel performance RACE injectors
From: 1 147,41 €- Up to 120hp per cylinder
- Every set is individually tested and balanced
- Injector map provided if needed
- OM64X & OM61X
- We use these in our race car
- In stock!
Select options This product has multiple variants. The options may be chosen on the product page
Related products
-
Software tuning
318,73 €- ECU software upgrade
- Available worldwide!
- Cheapest upgrade you can get!
- In stock!
-
OM628 400CDI V8 High Pressure pump – USED
362,55 €- L110, biggest Mercedes cdi pump!
- Fits OM61x and OM64x
- Up to 450hp
-
ARP studs set for girdle plate – Pair
39,04 €- Studs and nuts included
- Genuine ARP quality
- Perfect with our girdle plate
-
OM648 H-Profile connecting rod without bolts
79,68 €- Fits OM61x and OM64x engines
- Tested at 720whp!
- In stock!
English 
Finnish 
Swedish 
Reviews
There are no reviews yet.